Griffin MKIII Bit Driver - Blasted Tumbled Titanium

The Griffin MKIII bit driver in blasted and tumbled titanium has the most grip-forward finish in the titanium lineup. The bead blast creates a matte, textured surface and the tumble process knocks down any sharp edges while keeping that raw tactile feel. When your hands are oily from knife maintenance or you're working in tight spaces where control matters, this is the finish that gives you the most traction on the driver body. It's the least flashy titanium option and the most functional one.

Every Torx Size Your Knives Need

The MKIII ships with four Wiha Torx bits — T6, T7, T8, and T9. That covers pivots, clips, and body screws on the vast majority of production folders. Standard 1/4-inch hex bit compatibility means you can swap in flatheads, Phillips, or hex bits as needed. Magnetic retention locks the bit in place under torque, and the 608 ceramic bearing top cap spins without resistance for fast fastener work or mindless fidgeting. The milled grip section works with the blasted tumbled finish to give this build the best overall grip of any MKIII configuration. Measures 4.125 inches long at 0.75 inches in diameter.

Solid Titanium Bar Stock, Made in Canada

Machined from solid Grade 5 titanium bar stock and finished in Canada. The body screws apart to access internal storage for three additional 1/4-inch hex shank bits. Each driver ships with a branded pouch with Velcro patch, cleaning cloth, stickers, and a signed and dated certificate of authenticity.

For the full driver lineup, check out the Griffin Bit Drivers collection here.

Browse all Griffin Co. products here.

1. Specs:
2. Overall Length: 4.125" (105mm)
3. Handle Material: Titanium
4. Weight: 2.78oz
5. Country of Origin: Canada