Hinderer Eklipse Spear Point S45VN - Orange G-10

The Eklipse is known the world over as one of the toughest tactical folders regardless of your mission. Rick's focus when designing the Eklipse was a no nonsense tactical tool ready for the simplest cutting tasks to high speed low drag operations.

The Eklipse has a CNC flat ground Tanto blade that offers the best of both worlds offering maximum cutting potential in a blade that has a durable tip for prying. The blade thickness is a full .165", and can handle the toughest cutting chores. The blade locks up on a solid 1/4 in diameter Thumb stud which is press fitted into the blade. This makes for a very strong lockup as there is no loosening of the thumb stud which can happen with two piece designs. The fact that the thumb stud locks up against the frame adds an incredible amount of strength to the sideways torque of the blade as the sideways stresses are being stopped by the whole handle side, thus relieving the stress that would normally be put on the pivot.

This knife features the Tri-Way Pivot System. The knife is pre-installed with bearings, and also includes phosphor bronze and teflon washers.

1. Specs:
2. Overall Length: 8.25" (209.55mm)
3. Closed Length: 4.75" (120.65mm)
4. Blade Length: 3.5" (88.9mm)
5. Blade Thickness: .165" (4.19mm)
6. Blade Steel: S45VN
7. Blade Style: Spear Point
8. Blade Finish: Stonewashed
9. Handle Material: G-10
10. Pocket Clip: Yes, right hand only, tip up/tip down
11. Lock Type: Frame Lock
12. Weight: 5.6oz
13. Tri-Way Pivot: Yes
14. Country of Origin: USA