The Jack Wolf Gunslinger Jack is the knife that converted modern folder people into Jack Wolf people. Built on the classic gunstock pattern, the Gunslinger trades the traditional backspring for a frame lock seated cleanly in the integral titanium bolster, opened by a front flipper riding on ceramic bearings, with a nail nick left in place for the traditionalists. The result deploys like a modern flipper and carries like an heirloom, which is exactly the trick Jack Wolf Knives has been pulling off since the beginning.
Every Gunslinger runs a 3.23 inch clip point in Crucible CPM S90V, hollow ground thin behind the edge and hardened to 60-61 HRC. That combination cuts far above what a 3.3 ounce pocket knife has any right to, with the wear resistance to hold its edge through weeks of daily work. Blade finishes rotate by release, from hand satin to acid stonewash to DLC, so the same pattern reads dressy or workmanlike depending on the run. See where S90V sits among the super steels in our guide to every major knife steel compared.
The bolsters and liners are machined from a single billet of 6AL/4V titanium, so the lock lives inside the bolster itself rather than bolting on as a separate frame. Handle scales rotate through premium materials including linen micarta, ebony wood, CamoCarbon, and machined titanium, each release limited and rarely repeated. If you want a refresher on how frame locks compare to the rest of the field, our knife lock types explained guide covers it.
At 4.12 inches closed with a pocket clip and smooth two way deployment, the Gunslinger Jack is the Jack Wolf for people who carry hard and still want the gunstock silhouette their grandfather would recognize. The Gunslinger returns in fresh configurations across production runs, but individual variants sell through and do not come back, so the scale you want is the scale you should buy. Browse the full lineup in our Jack Wolf Knives collection.