MachineWise Sonora - Brass Bolster - Raw Titanium Ripples Textured Handle - Stonewash S90V Blade #1612

Equipped with a robust button lock, and integral titanium handle construction. The Sonora is ready for all your day to day tasks! MachineWise got it's start as a brand focused on producing high quality balisongs, and this passion for the fidgety things in life stuck with us in the design of the Sonora. Our goal is to deliver the ultimate EDC knife that also can entertain you for hours at your desk. The handle of the Sonora is machined from a single piece of titanium. Only two screws and a single pivot are used to assemble the Sonora. The Sonora runs on a bushing pivot system. Bushing pivots are a mainstay of the balisong industry and can be tuned to provide free swing and zero blade play. A bushing is a small donut that rides in a corresponding hole in the blade. When assembled and tightened, the bushing stands the washers off from the blade. This effectively allows the blade to float in between the washers on a cushion of oil. Our bushings are tuned to within 0.0008 inch of oversize to create rock solid lock-up while allowing for free swing. Proudly machined, assembled and finished in Phoenix, Arizona. Our small five-person team puts 110% effort into every product that leaves our door.

• IN THE BOX:
• Sonora
• QC Card
• Maintenance Guide
• Sample of Carbon Honey thin (MW Orange Creamsicle scent)
• Bolster coin
• WIHA T15 Bit

1. Specs:
2. Overall Length: 7.95" (202mm)
3. Closed Length: 4.4" (112mm)
4. Blade Length: 3.35" (85mm)
5. Blade Thickness: 0.125" (3mm)
6. Blade Steel: S90V
7. Blade Finish: Stonewash
8. Handle Material: Titanium
9. Handle Thickness: 0.44" (11mm)
10. Pocket Clip: Yes, right or left hand, tip up
11. Lock Type: Button
12. Weight: 3.5oz
13. Country of Origin: USA